This is a new engraving project I created. The graphic is a topographical map of Frisco. Texas (USA). Roads, streets, highways, and ground contours are the lines in the graphic. Total engrave time was 45 minutes on the side shown with another five minutes to engrave the KautzCarft Laser logo on the reverse side. The …
The Xtool D1 Pro 20 watt LASER has landed at KautzCraft! It is everything I expected it would be. Good size, well made and good power LASER. 20 watts is way more power than I need at 100% for normal engraving. 50% LASER power is about perfect with 3600mm/m travel speeds (60mm/s). The high power …
You have seen a board like this before. The green cutting pad mounted on a bamboo cutting board. The LASER engraving is different here. Both boards are intended for the quilter using rotary cutters. They usually use much larger green pads at home, but for on-the-go retreats (they are ALWAYS on retreats) these small pads …
Just ordered one of these 20 watt (output) Diode LASER xTool D1 Pro engraver/cutters. Operates the same as my present 5 watt (output) diode LASER sold by TallTree, Read my TallTree blog post HERE. The D1 Pro has all the same ENVIRONMENT exposure issues as my originaL. But is four times the available power and …
Many hours invested in new LASER projects in the last week. The lead photo is a simple cutting pad / cutting board project. My spouse is a quilter and discovered a cheaply priced stash of the green self healing cutting pads on one of her quilting trips and brought home ten of them. I have …
